Complete A-Z Cisco CCNA Networking Course with practical hands-on lab
Learn everything about Networking and Routers master various aspects of networking, CCNA security, network services, internet protocol to pass CCNA exam
CCNA Jobs
-
Network Engineer L1
-
Network Engineer L2
-
Network Engineer L3
-
Network Security Engineer
-
Network Support Engineer
-
IT Security Engineer
-
Technical Support Engineer
CCNA Jobs
-
Switching Engineer / Router Engineer
-
Desktop Support Engineer
-
System Administrator
-
Network Administrator
-
Cloud Network engineer
-
Cloud Infrastructure Consultant
​CCNA Job Responsibilities
-
Configure and install various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS)
-
Perform network maintenance and system upgrades including service packs, patches, hot fixes and security configurations
-
Monitor performance and ensure system availability and reliability
-
Monitor system resource utilization, trending, and capacity planning
-
Provide Level-1/2 working on Incidents and Changes and support and troubleshooting to resolve issues
-
Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the network infrastructure
-
Select and implement security tools, policies, and procedures in conjunction with the company's security team
-
Liaise with vendors and other IT personnel for problem resolution
-
Deep understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS)
-
Hands-on experience with monitoring, network diagnostic and network analytics tools
-
Solid understanding of the OSI or TCP/IP model
-
IP address auditing
​CCNA Job Responsibilities
-
Establishes and maintains network performance.
-
Builds net configurations and connections.
-
Troubleshoots network problems.
-
IP address auditing.
-
Establish networking environment by designing system configuration and directing system installation.
-
Defines, documents, and enforces system standards.
-
Maximizes performance by troubleshooting network problems and outages and scheduling upgrades.
-
Cisco Routers, ASA
-
Fire Threat and Defense (Firewall)
-
Ritsa Fabric (Switches)
-
Nexus Switches
-
Palto Alto (Firewall)
-
Configures router.
-
Updates data servers and network equipment.
-
Collaborates with network architects on network optimization.
-
Secures network systems by establishing and enforcing policies and defining and monitoring access.
-
Updates job knowledge by participating in educational opportunities, reading professional publications, and participating in professional organizations.
-
Accomplishes information systems and organization mission by completing related results as needed.
Self Paced Training
-
Learn as per your comfort
-
Good for working Professionals
-
40 hrs E-learning
-
Live Recorded Lectures
-
Upgrade to online /Classroom Training
-
Well explained in details Training
-
Practicals well explained
Online Video Portal
Classroom Training
-
Instructor Led Classroom Training
-
Learn form Industry Expert
-
Detail Hands on Practicals with the Trainer
-
Live Projects​
-
Ready Study Material
-
Recorded Classes for later view or missed classes
-
Technical Interview Preparation
-
One to one Self assessment
-
Resume Preparation, distribution and upload to Job portals
-
Mock Interview Prepration
Get In Touch to Avail
15% Off
Online Training
-
Live Instructor Led Classroom Training
-
Good for Remote Students
-
Save on your Housing, Food and Travel
-
Upgrade to Classroom Training by paying difference fees
-
Join from Home, Office or any location
Get In Touch to Avail
30% Off
Online / Classroom Batch Schedule
Last Date of Registration : 5th of every month
Batch Start Date : 10th of every month
Schedule : MON to FRI
Students : Max 20 Student Per Batch
Morning Batch : 9:00 am to 1:00 pm
Afternoon Batch : 2:30 pm to 5:30 pm
Evening Batch : 6:30 to 9:30 pm
​
​
Book Now
To confirm your batch
Module 1:- Basics of Networking
Learning Objective: In this Module you will learn about basics of Networking, Common networking model like LAN and WAN and understand how traffic flows from one device to another device following the OSI Model
-
What is Networking
-
Type of Network
-
Local Area Network (LAN)
-
Wide Area Network(WAN)
-
IP Address and MAC Address
-
TCP and UDP
-
OSI Model
-
Packet Tracer Installation
Module 2:- Hub/Switch/Router
Learning Objective: In this Module you will learn about packet and type of Packet in Networking and you will learn how a Hub/Switch and Router Works
-
What is a Packet
-
How a Packet is constructed
-
Unicast , Multicast and Broadcast Packet
-
How Ping and Traceroute Works
-
Importance of ARP Packet
-
How Hub Works
-
Disadvantage of using Hub
-
How Switch Works
-
Switch MAC Table
-
How MAC Table can be changed
-
MTU in Networking
-
Why a Router is Needed
-
Router’s Routing Table
-
How Route Table can be modified
-
What is Default Gateway
-
Difference between Hub/Switch and Router
Module 3:- Router/Switch Memory, Booting Process, Access Mechanism and Command Line Configuration
Learning Objective: In this Module you will learn about different type of memory in Router/Switch, understand the booting process, learn how to take console and remote access of Router/Switch and do configuration in Router/Switch using command line
-
Need of Memory in Router/Switch
-
Flash/RAM/ROM/NVRAM Memory
-
How a Router/Switch Boots
-
Type of Ports in Router/Switch
-
How to take Console Access
-
How to take Remote Access (Telnet/SSH)
-
User and Privilege Mode in Router/Switch
-
Commonly used Basic and Advance Commands in Cisco Router/Switch
Module 5:- Switching VLAN and VTP
Learning Objective: In this Module you will learn why VLAN is created and how to perform inter-VLAN routing and then understand the need of VTP protocol
-
What is LAN
-
What is VLAN
-
Access and Trunk Port
-
Creation of VLAN
-
Inter-VLAN Routing with L3 Switch
-
What is VTP
-
Need of VTP
-
Server/Client and Transparent VTP Mode
Module 4:- IP Address and SubNetting
Learning Objective: In this Module you will learn about Different Class of IP Address, type of IP Address and you will perform Subnetting in depth
-
What is IP Address
-
Importance of Subnet Mask
-
Class of IP Address
-
Private and Public IP Address
-
Why Subnetting is performed
-
Practice Subnetting
-
Subnet calculator
Module 6:- SwitchingSTP, RSTP and Ether Channel
Learning Objective: In this Module you will learn about a Loop Breaking Protocol known as STP and its advance version known as RSTP and you will learn how Ether channel is configured
-
Why STP(Spanning Tree Protocol) is Needed
-
How STP works to break loops in Network
-
STP Root Bridge Selection and Port State
-
Difference between STP and Rapid STP
-
Ether Channel Configuration
Module 7:- Routing Static and Dynamic Routing
Learning Objective: In this Module you will learn about static routing and its disadvantage while using in large network and about dynamic routing protocols
-
Need of Routing
-
What is Static Routing
-
What is AD value in Routing
-
Configure Static Routing
-
Disadvantages of Static Routing
-
What is Dynamic Routing
-
Advantages of Dynamic Routing
Module 9:- Firewall Access-List, NAT and VPN
Learning Objective: In this Module you will learn how to filter traffic using Access-list and then how to save public IP address by using NAT technology and you will learn how to create a site to site IPsec VPN tunnel between firewall
-
Why Access-List is Needed
-
Access-List Working
-
Configuration of Standard and Extended Access-List
-
Why do we need NAT
-
Configuration of Dynamic NAT
-
What is VPN
-
How to create IPsec VPN Phase 1 and Phase 2 in VPN
-
Creating Site to Site VPN
Module 8:- Routing OSPF, EIGRP and BGP
Learning Objective: In this Module you will learn about dynamic routing protocols like OSPF, EIGRP and BGP
-
What is OSPF
-
How OSPF Routing Protocol Works
-
What is Area in OSPF
-
OSPF operation and configuration
-
What is EIGRP
-
How EIGRP Routing Protocol Works
-
What is AS Number in EIGRP
-
EIGRP operation and configuration
-
OSPF Versus EIGRP
-
Need of BGP
-
How BGP Routing Protocol Works
-
BGP operation and configuration
-
Perform Routing using L3 Switch
Module 10:- SYSLOG, DHCP, HSRP, Port-Security, Wire shark Troubleshooting
Learning Objective: In this Module you will create SYSLOG server to save logs and configure a router as DHCP server and you will learn about powerful troubleshooting tool known as wire shark and learn network troubleshooting techniques
-
Need of Syslog
-
Configuration of Syslog
-
What is DHCP
-
Configure Router a DHCP
-
Need of HSRP
-
Configure HSRP on Router
-
Need of Port-Security
-
Configure Port-Security on Switch
-
Wireshark Troubleshooting Tool Usage
-
Understanding Wire shark Filters
What is CCNA
CCNA is an entry-level networking certification. If you undergo training in CCNA then you can apply for networking roles in Data Centers, Cloud infrastructure and take roles like network specialist, network administrator, and network engineer. It stands for Cisco Certified Network Associate. CCNA is a commonly requested IT certification, with over 9,000 job listings on Glassdoor and 6,000 on Indeed that mention the certification in the US, as of May 2022.
​
If you have completed graduation in the field of B.Tech CSE, BCA, Bsc. Computer Science or any other particular field of Engineering and seeking job opportunities after graduation and have failed in finding the right job then, you are completely eligible to apply for Cisco Certification Courses on the Associate level.
Networking Career Path
CCNA, CCNP, and CCIE technical skills or certifications are the standard markers in job-listing qualifications Cisco certifications represent your level of expertise with specific technologies and communicate where your skills land in a globally recognized, respected way. Hiring managers trust Cisco.
Do you provide Job Placements?
Dcentmass is one of the best IT Skill development Centers. We make you Job ready. We have alumni of our Ex students who forward resumes to their HR’s and a lot of recruitment firms approach us for the requirement of good skilled candidates. We help our students prepare their resumes and provide assistance for interview preparation. If you go through the course and our instruction diligently you will be in a very good position to crack the interviews yourself and find a well-paid job
Can I get job placement from you even if I have not trained from your Center?
Yes, You will go through the interview process, Communication Round, Technical Round Scenario based questions and check your profile in the job portals. We will take your assessment and understand your strengths and weaknesses. Based on the assessment we will put you through an improvement plan and make you Job ready
Should I rejoin the same Course which I have taken from another institute for your help in Job Placement?
​No, Based on your assessment results we will put you through a quick Improvement plan and help you in Job Placement